Scenarios (WHO 0)

Original Document

Introduction

In this document you can find the Open frames which implement the Scenario scheduling through the Scenarios modules (F420/IR 3456).

Compatible Hardware

Brand	Item	Description
Legrand	03551	Scenario module F420
	88301	IR interface 3456
BTicino	F420	Scenario module
	IR interface 3456	IR interface

Table WHAT

Value	Description	Notes
1	Scenario 1*
2	Scenario 2*
3	Scenario 3*
4	Scenario 4*
...	...
16	Scenario 16*
...	...
20	Scenario 20**
	Commands only for F420
40#X	Start recording X scenario	X = scenario number (1-16)
41#X	End recording X scenario	X = scenario number (1-16)
42	Erase all the scenarios
42#X	Erase X scenario	X = scenario number (1-16)
43	Lock Scenarios central unit
44	Unlock Scenarios central unit
45	Unavailable Scenarios central unit
46	Memory full of Scenarios central unit

Table WHERE

Value	Description
01	Control Panel 01
02	Control Panel 02
...	...
99	Control Panel 99

Open Messages: Commands Session

Scenario Activation Command (WHAT 1-16/20)

Session Type	Direction	Open Frame	Notes
Commands	Client → Server	*0*WHAT*WHERE##	WHAT: Enable selected scenario (1-16/20)
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)
Commands	Server → Client	*#*1## or *#*0##	ACK: command sent to Bus / NACK: command not sent to Bus
Events	Server → Client	*0*WHAT*WHERE##	Event notification

Note: For the module F420 (03551) it is available the configuration up to 16 different scenarios; on the other side the IR 3456 (88301) interface can handle up to 20 scenarios.

Commands Only for Scenarios Module F420

Important: Whether you have to program the scenario module you have to open a specific connection with this frame *99*9## (read the document OpenWebNet_introduction)

Start Recording Scenarios (WHAT 40#1-40#20)

Note: Only with F420 (03551) because the 3456 (88301) module doesn't support this frame

Session Type	Direction	Open Frame	Notes
Commands	Client → Server	*0*40#X*WHERE##	Enable selected scenario X = (1-16)
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)
Commands	Server → Client	*#*1## or *#*0##	ACK: command sent to Bus / NACK: command not sent to Bus
Events	Server → Client	*0*40#X*WHERE##	Event notification

End Recording Scenarios (WHAT 41#1-41#20)

Note: Only with F420 (03551) because the 3456 (88301) module doesn't support this frame

Session Type	Direction	Open Frame	Notes
Commands	Client → Server	*0*41#X*WHERE##	Disable selected scenario X = (1-16)
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)
Commands	Server → Client	*#*1## or *#*0##	ACK: command sent to Bus / NACK: command not sent to Bus
Events	Server → Client	*0*41#X*WHERE##	Event notification

Erase All Scenarios (WHAT 42)

Note: Only with F420 (03551) because the 3456 (88301) module doesn't support this frame

Session Type	Direction	Open Frame	Notes
Commands	Client → Server	*0*42*WHERE##	Erase all scenarios
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)
Commands	Server → Client	*#*1## or *#*0##	ACK: command sent to Bus / NACK: command not sent to Bus
Events	Server → Client	*0*42*WHERE##	Event notification

Erase Single Scenario X (WHAT 42#1-42#20)

Note: Only with F420 (03551) because the 3456 (88301) module doesn't support this frame

Session Type	Direction	Open Frame	Notes
Commands	Client → Server	*0*42#X*WHERE##	Erase the selected scenario X = (1-16)
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)
Commands	Server → Client	*#*1## or *#*0##	ACK: command sent to Bus / NACK: command not sent to Bus
Events	Server → Client	*0*42#X*WHERE##	Event notification

Lock Scenario Central Unit (WHAT 43)

Note: Only with F420 (03551) because the 3456 (88301) module doesn't support this frame

Session Type	Direction	Open Frame	Notes
Commands	Client → Server	*0*43*WHERE##	Lock scenarios central unit
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)
Commands	Server → Client	*#*1## or *#*0##	ACK: command sent to Bus / NACK: command not sent to Bus
Events	Server → Client	*0*43*WHERE##	Event notification

Unlock Scenarios Central Unit (WHAT 44)

Note: Only with F420 (03551) because the 3456 (88301) module doesn't support this frame

Session Type	Direction	Open Frame	Notes
Commands	Client → Server	*0*44*WHERE##	Unlock scenarios central unit
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)
Commands	Server → Client	*#*1## or *#*0##	ACK: command sent to Bus / NACK: command not sent to Bus
Events	Server → Client	*0*44*WHERE##	Event notification

Open Messages: Events Sessions

Enable Scenarios (WHAT 1-16/20)

Note: For the module F420 (03551) it is available the configuration up to 16 different scenarios; on the other side the IR 3456 (88301) interface can handle up to 20 scenarios.

Session Type	Direction	Open Frame	Notes
Events	Server → Client	*0*WHAT*WHERE##	Enable selected scenario (1-16)
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)

Start Programming Scenarios (WHAT 40#1 – 40#16)

Note: Only with F420 (03551) because the 3456 (88301) module doesn't support this frame

Session Type	Direction	Open Frame	Notes
Events	Server → Client	*0*40#X*WHERE##	Start programming the selected scenario X = (1-16)
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)

End Programming Scenarios (WHAT 41#1 – 41#16)

Note: Only with F420 (03551) because the 3456 (88301) module doesn't support this frame

Session Type	Direction	Open Frame	Notes
Events	Server → Client	*0*41#X*WHERE##	End programming the selected scenario X = (1-16)
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)

Erase All Scenarios (WHAT 42)

Note: Only with F420 (03551) because the 3456 (88301) module doesn't support this frame

Session Type	Direction	Open Frame	Notes
Events	Server → Client	*0*42*WHERE##	Erase all the scenarios
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)

Erase Single Scenario X (WHAT 42#1-42#16)

Note: Only with F420 (03551) because the 3456 (88301) module doesn't support this frame

Session Type	Direction	Open Frame	Notes
Events	Server → Client	*0*42#X*WHERE##	Erase the selected scenario X = (1-16)
			WHERE: 01-99 (Scenario module Point to Point)
			WHERE: 01-99#4#I (Scenario module on Local Bus level 4 with Interface I)

Notes

• In the F420 (03551) it is possible to program up to 16 scenarios.
• In the IR 3456 (88301) it is possible to recall up to 20 different scenarios.

---

Copyright Notice

Copyright (C) 2010 www.myopen-legrandgroup.com. All Rights Reserved.

License

By using and/or copying this document, you (the licensee) agree that you have read, understood, and will comply with the following terms and conditions:

Permission to copy, and distribute the contents of this document, in any medium for any purpose and without fee or royalty is hereby granted, provided that you include the following on ALL copies of the document, or portions thereof, that you use:

• A link or URL to the www.myopen-legrandgroup.com.
• The copyright notice of the original author, or if it doesn't exist, a notice (hypertext is preferred, but a textual representation is permitted) of the form: "Copyright (C) [date-of-document] www.myopen-legrandgroup.com. All Rights Reserved.

When space permits, inclusion of the full text of this NOTICE should be provided. We request that authorship attribution be provided in any software, documents, or other items or products that you create pursuant to the implementation of the contents of this document, or any portion thereof.

Any contributions to the document (i.e. translation, modifications, improvements, etc) has to be submitted to and accepted by the My Open staff (using the forum of the community or sending an email via the www.myopen-legrandgroup.com dedicated section) . Once the improvement has been accepted the new release will be published in the My Open Community web site.

Disclaimers

THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, OR TITLE; THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR ANY PURPOSE; NOR THAT THE IMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS.

COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE DOCUMENT OR THE PERFORMANCE OR IMPLEMENTATION OF THE CONTENTS THEREOF.

The name and trademarks of copyright holders may NOT be used in advertising or publicity pertaining to this document or its contents without specific, written prior permission. Title to copyright in this document will at all times remain with copyright holders.